Brief hydraulic bending machine elements and also the oil maintenance

Hydraulic bending machine uses magnetic force force holding so the pressure plate are often created into a range of workpieces needs, however might have facet walls of the work machining. The hydraulic bending machine is that the most important a part of the mechanism, and it always hydraulic lubrication and regular scrutiny and maintenance area unit necessary, in the main talk to the following:
1. Hydraulic elements
a.monthly cleansing hydraulic elements (substrate, valves, pumps, tubing, etc.) to stop dirt from coming into the system, you'll be able to not use detergents;
b.one month when the new machine, check the pipe bend while not deformation, ought to get replaced if uncommon, 2 months when use, ought to tighten the affiliation of all components, do this work ought to be close up, the system no pressure.
2. The hydraulic circuit
a.weekly check oil tank, like hydraulic systems when maintenance ought to conjointly check the oil level ought to be below the oil window filling the hydraulic oil;
b.After 2000 hours of b, the new machine ought to car care when each ulterior work from 4000 to 6000 hours ought to car care, each car care, fuel tank ought to be cleaned;
c.oil temperature ought to be between thirty five ℃ ~ sixty ℃, shouldn't exceed seventy ℃, like the harm is simply too high can result in deterioration of the oil quality and accessories.
d.lubrication points to refuel on time, the hydraulic oil ought to be chosen counting on the setting.
3. Filter
a.at every car care, filters ought to get replaced or totally cleaned;
b.have the relevant alarm or machine filter isn't clean, and different abnormalities, ought to get replaced.
c.also can refuel or car care at bending machine, the employment of facet through road law by filtration vacuum cargo ship or hydraulic filter impurities and water treatments. so as to make sure the traditional operation of hydraulic bending machine.